4fa8b0e93193e.jpg4fa8b10365124.jpg4fa8b11ca686d.jpg4fa8b15eb2994.jpg4fa8b17631d51.jpg4fa8b1a31484e.jpg4fa8b1ebacdb5.jpg

Latest Product

MP Rotator

Free Pump Health Check 12 months from purchase. 

 

Home > Pumping > Waste Water & Drainage > Grundfos Waste Water & drainage

Grundfos Waste Water & drainage

Hydro Multi-E

Hydro Multi-E

KPB Series

KPB Series

The submersible pump from the KPBasic series is designed mainly for automatically operated fixed applications in domestic use, draining basements and garages which are subject to flooding.

Thanks to its compact, easy to handle design, it can also be used as a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations and underpasses.It is also ideal for gardening and hobbies in general.

Solo Lifting Station

Solo Lifting Station

Sololift + series are small, compact, automatic lifting stations suitable for the pumping of wastewater. They are primarily designed for use where wastewater cannot be led directly into the sewer by means of a natural downward slope.

Some typical uses include;

toilets in basements below sewer level and
toilets installed in areas remote from the main soil pipe and thus a natural slope cannot be established.

SPO Series

SPO Series

The SPO pump is designed for water supply and pressure boosting in:

-private homes and
-week-end cottages

The SPO pump with inlet strainer covers installations, such as:

-traditional 5" or 6" wells
-shallow wells
-rainwater collection in tanks and
-emptying of garden ponds

Unilift CC Series

Unilift CC Series

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater. The pumps are suitable for both stationary and portable use. They are for automatic operation.

Unilift KP Series

Unilift KP Series

Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase canned motor in insulation class F with thermal overload protection. The pump is fitted with suction strainer and a carrying handle and is supplied with a 5 m mains cable and float switch for automatic start and stop. The impeller is a semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids. Niro models are supplied with automatic vertical level switch and non-return valve.

Unilift AP12 Series

Unilift AP12 Series

Submersible drainage pump type. vertical single-stage stainless steel submersible pump with vertical discharge port. Integrated submersible 1-phase totally enclosed motor with thermal overload protection. The pump is fitted with a suction strainer and level switch for automatic start and stop.

Unilift AP35 & AP50 Series

Unilift AP35 & AP50 Series

Vertical, single-stage, stainless steel submersible pump with vertical discharge port. Integrated submersible 1-phase totally enclosed motor with thermal overload protection. The pump is also fitted with a suction strainer and level switch for automatic stop. 

Unilift AP35B & AP50B Series

Unilift AP35B & AP50B Series

Submersible effluent/water pump.

Vertical, single-stage stainless steel submersible pump. The pump is fitted with ring stand and carrying handle and is supplied with a 5m mains cable and a level switch for automatic start and stop.

A Vortex impeller (35mm for AP35B and 50mm for AP50B is fitted and is suitable for pumping surface water, groundwater, waste water and similar.

The pump is powered by an integrated submersible 1-phase motor with thermal overload protection.

Bookmark a SiteTell a FriendPrintContactHomeYouTubeLinked InTwitterFacebook